Trestle dining table – Trestle tables bank as long that can be built to accommodate large families. Banks for these tables can be built using the same construction process of reduction measures wood. Banks can slip under the table when not in use to increase free space in your kitchen. Measure, mark and cut 10 pieces of wood 6 which are 26 inches long. These are the cards on the table.
Measure, mark and cut 2 pieces of 2 by 4 wood that are 20 inches long. These are the side supports for your desktop. Measure, mark and cut 2 pieces of 2 by 4 wood that are 58 inches long. These are the front and rear supports for the top of the trestle dining table. Arrange the front and rear supports a rectangle shape. The timber should be placed in the narrow edge. Screw brackets together at the top and bottom of each corner with wood screws 3 inches.
Placing joints at the top of the support so that the long side of each tab is a projection aligns and 1 inch on all four sides of the support table. Screw top of the table top support plates with wood screws 2 inches. Turn the top down. Measure, mark and cut four pieces of 2 by 4 wood that are 29 inches long. These are trestle dining table legs. Align a leg at each corner in a vertical position inside corners of the support structure. The sides should be 4 inches along the left and right edges of the support frame.