Vinyl flooring planks is a form of non-bonded floor with boards that link together at the sides and ends to form a hard surface. They are not nailed or glued down, but just sit unattached. The word trim the edges of the room keep it all in place. Non-glued floor systems are traditionally made of wood. The major advantage of vinyl is that cutting easier and is moisture resistant.
Lay vinyl flooring planks, allow the floor clean and dry. Two vinyl planks interconnecting the ends, magnetic them together. Put them next to the wall where you want to start. Plastic shims between the boards and the wall, each pair of feet, make it to set up a small space, the space will allow the boards to expand with temperature changes. Clip the following boards at the ends of the first in a course along the wall, with shims next to all of them. The final plank in the course to the counter angle, to be fixed by a level on the shelf, a razor knife carried out to score the shelf fracture subsequently sliced into two in addition to the level.
Lay vinyl flooring planks, Plat the second course in the same way as the first, except at the end where you start before it drops. Repeat for each course; start together on the side where the previous one ended. For the last course, cut the plates along their length, if necessary, so that they fit against the last wall with a small space. Measure and cut floor trim to go around the perimeter of the room, covering the gaps through the walls and edges pressed to the floor. Nail the trim on the walls, not the floor.